PYINLAB600003

Lab Marshall Stability Test Apparatus

The Marshall Stability Test Equipment is used by contractors, testing
laboratories engineers, highway departments, and other government
agencies to test the stability of bituminous samples.
It is designed for measuring resistance to plastic flow of cylindrical
specimens of bituminous paving mixture loaded on the lateral surface.
The machine can deliver measurement data for use with hot mixture
consisting of asphalt or tar and aggregate up to 25.4 mm maximum size.
The equipment has a bench top loading frame with a screw-driven
modifiable crosshead.
Marshall Apparatus Consists Of:
Robust construction
50KN capacity
Rate of travel 50.8mm/min
Safety cut-off switch
It consists of body housing, a geared screw jack and motor drive
mechanism suitable for operation on 230 V, 50Hz, Single Phase, A.C.
supply.
MARSHALL LOAD FRAME 1 No.
Breaking Head Stability Mould, with a dial gauge ( having 25mm travel
and 0.01mm least count), for flow measurement 1 No.
Compaction Mould, Steel cylindrical 3 Nos.
Compaction Hammer, satisfies BS 598.
The hammer has a 4535 g sliding weight with a free fall of 457 mm 2 Nos.
Base Plate 3 Nos.
Extension Collar 3 Nos.
Compaction Pedestal, Manual Operation, Comprising a steel plate capped
on a wooden post.
A Mould Clamp is fitted to the top of the plate . 1 No.
Load Transfer Bar 1 No.
Paper Discs, Non absorbent, 11 cm diameter pack of 100 No. 1 Pkt.