PYINLAB660002

Lab Electronic Spring Tension Machine

Spring tension and compression test instrument Adopting electric load
reduction system after deceleration to driven precision ball screw
assembly loading to achieve a fully digital adjustment data acquisition
and control process.
It is made based on the national spring tensile and compression tester
standards of technical requirement, professional design of automatic
control and data acquisition system, realized the data acquisition and
control process full digital adjustment.
Mainly used to tension spring, compression spring, saucer reed, tower
spring, leaf spring, clip spring, flat spring, composite spring, gas
spring, mold spring, deformed spring and other precision spring tensile,
compression, displacement and rigidity test and analysis.
Main Features:
Automatically clearing: test force, displacement, according to the needs
to be cleared at any time;
Automatic calibration: system can automatically realize the accuracy of
the calibration value
Automatic shifting: automatic switching the appropriate range to ensure
accuracy load;
Control method: You can achieve a variety of control method, test force,
test speed, displacement, etc., with the following features:
Setting the test force P, detect the spring deformation F;
Setting the deformation F, detect the spring test force P;
Setting the test force P, detect the remaining height of the spring (or
the tensile length of the tensile spring) H,
Setting the spring remaining height of the spring, (or the tensile
length of the tensile spring) H, detect the spring test force P; Can set
the pre-compression height of the pre-compressed spring, the number of
pre-compression can be arbitrarily set;
Setting max 10 detection points (can be set into the return detection);
The detection of the spring deformation is in contact with the work
pressure plate shall prevail, then the test should have the reaction
force, the size of the test force (ie, the initial force) arbitrarily
set;
The deformation caused by the sensor can be compensated.
The deformation caused by the sensor and stiffness of the machine does
not affect the accuracy of displacement.
Technical Specifications :
Max test force (N): 10kN, 20kN, 30kN, 50kN, 100kN, 200kN, 300kN
Effective tensile space: 800, 700, 700
Effective compression space: 800, 700, 700
Structure: Four columns floor type (upper tensile, lower compression /
upper compression, lower tensile)
Control method: Computer automatic control
Displacement value relative error: ?±1%
Displacement resolution: 0.01mm
Deformation value relative error: ?±(50+0.15L) um
Test accuracy: 1 class
Test force test arrange (F·S): 2%~100% F·S( stepless )
Test force value relative error: ?±1%
Speed adjust range: 0.05-300mm/min, 0.05-200mm/min
Speed error: ?±1%
Pressure plate size: 400, 500, 550
Pressure plate diameter: 110mm
Power supply: AC 220V±10%,50Hz