Lab Computerized Francis Turbine Trainer
PYINLAB700002
Lab Computerized Francis Turbine Trainer
The closed water circuit consists of a tank with optional cooling, a
centrifugal pump and a flow control valve for adjusting the inlet
pressure.
The transparent operating area of the turbine enables an optimal view of
water flow, rotor and guide vanes during operation.
By adjusting the guide vanes the angle of attack, the cross-section and
thus the output of the turbine are changed.
An asynchronous machine is used as a generator for loading the turbine.
A pump with variable speed via frequency converter provides for an
energy efficient operation.
The speed of the turbine is recorded by means of an inductive,
non-contact position sensor at the generator shaft.
The generator is equipped with a pendulum bearing and with a force
sensor to determine the torque.
The pressures at the inlet and outlet of the turbine, the temperature
and the flow rate are recorded by sensors.
The measured values are displayed digitally and can be processed further
on a PC.
FEATURES:
Determination of the mechanical power and hydraulic power of the turbine
Determination of efficiency
Recording of characteristic curves
Investigation of the conversion of hydraulic into mechanical energy
Investigation of the influence of the guide vane position
Velocity triangles
SPECIFICATIONS:
Hydraulic power: 2,1kW at 1500min-1
Mechanical power: approx. 1,4kW at 1500min-1
Rotor, D: 165mm, 8 blades
8 guide vanes, angle of attack adjustable: 0…23°
Centrifugal pump, multistage :
Variable speed
Power consumption: 5,5kW
Max. Flow rate: 900L/min
Pump head: 42m
Asynchronous machine as generator :
Output: 2,2kW at 1440min-1
Tank: 550L
Measuring ranges :
Temperature: 0…100°C
Flow rate: 0…1000L/min
Torque: 0…20Nm
Speed: 0…3000min-1
Pressure (inlet): ±1bar (turbine)
Pressure (outlet): 0…6bar (turbine)
Power: 0…2200W (generator)
400V, 50Hz, 3 phases
400V, 60Hz, 3 phases, 230V, 60Hz, 3 phases
Related Products
Lab Computerized Francis Turbine Trainer — Manufacturers, Suppliers & Exporters in India
Lab Computerized Francis Turbine Trainer
Manufacturer of Lab Computerized Francis Turbine Trainer
In-house production of lab computerized francis turbine trainer at our ISO 9001 certified workshop in Mohra, Haryana — from raw material to final calibration under one roof.
Supplier & Exporter Worldwide
Trusted supplier of lab computerized francis turbine trainer to schools, colleges, universities and research institutions across India and 40+ export countries.
Bulk Supply & MOE Tenders
Full tender documentation, sample submissions and sealed unit pricing for Ministry of Education tenders and multi-institution bulk supply of lab computerized francis turbine trainer.
Why Choose Physics Lab Equipments for Lab Computerized Francis Turbine Trainer?
Sourcing lab computerized francis turbine trainer for a school physics lab, college laboratory, university curriculum or government tender? Here's what makes Physics Lab Equipments the preferred manufacturer and OEM partner.
Every lab computerized francis turbine trainer unit passes incoming material check, in-process inspection and final calibration before dispatch.
Built to match CBSE, ICSE, state board, IB and international physics curricula — usable by teachers without retraining.
BOQ specifications, country-of-origin certificates, calibration records and packing lists prepared in-house for MOE and procurement tenders.
Source Lab Computerized Francis Turbine Trainer with your own branding, packaging and dealer documentation through our OEM programme.
Export-grade crating, customs paperwork and consolidated shipping to Africa, Middle East, Southeast Asia and the Caribbean.
No middleman markup. Quotes scale with order volume — from a single classroom kit to multi-container national tender shipments.